Product
REBAR THREADING MACHINE
₹129,800.00 Including GST
Prominent & Leading Supplier and Distributor from New Delhi, we offer Rebar Threading Machine such as Rebar Threading Machine- Fully Automatic and Rebar Threading Machine- Semi Automatic ( Manual).
Rebar Threading Machine- Fully Automatic
| Specification | Value | |
| Rebar Diameter | 16 To 40mm | |
| Motor Power | 4kW | |
| Electricity | 415V 50HZ | |
| SPEED | 40-62r/min | |
| Main shaft speed | 80mm | |
| Thread Pitch | 3.5 | |
| Net Weight | 380 kg | |
The machine is mainly used of rebar in Construction projects, being key equipment to thread and join the rebar to gain length.
Main Characteristic:
- Very High on Production, Saves lot of time & replacing blades
need only 5 minutes - Equipped automatic opening & closing structure, one time caliper
rebar then finish working at the 30 seconds. - Roll stamping thread after steel bar rib peeling, with good shape of
thread, high precision and conformed diameter size - Processing parallel thread for ribbed rebar 16mm – 40mm
- Rolling wheel has long service period, low additive cost of connector
- Easy to adjust for rolling steel bars in different specifications,
adjustment can be made without loosing rolling head, with same given
screw distances.
Rebar Taper Threading machine
Technical Specification:
| Processing of bar diameter range | 16 mm to 40 mm | |
| Processing thread length | Less than or equal to 90 mm | |
| Processing steel Length | Greater than or equal to 300 mm | |
| Rolling head speed | 41 r/min | |
| Motor Power | 4kW, Voltage: 380V | |
| Total weight | 510kg | |
Main Characteristic:
- Very High on Production, Saves lot of time & replacing blades
need only 5 minutes - Roll stamping thread after steel bar rib peeling, with good shape of
thread, high precision and conformed diameter size - Processing parallel thread for ribbed rebar 16mm to 40mm
- Rolling wheel has long service period, low additive cost of connector
- Easy to adjust for rolling steel bars in different specifications,
adjustment can be made without loosing rolling head, with same given
screw distances
Reviews
There are no reviews yet.